Chat Online with UNIPOWER Corporation Representative
Telecom / Network Power ProductsFor Information call :
North America: 954-346-2442 x1071
Europe: +44 (0)1903 768200
View Cart

INVO Series - 5kVA Inverter/Charger

All products can be customized to meet specific requirements.
Ideal for long-run UPS applications

INVO Series - 5kVA Inverter/Charger

PDF Datasheets

For Support call:
North America: 954-905-1071
Europe: +44(0) 1903 768 200
Models Available
Models Output Voltage Input Range Battery Voltage Charge Current Max Output Power Buy
INVC5048H 230VAC 180-270VAC (2) 48V 20A/35A (3) 5000VA
4200W (1)
Call to Order
NOTES: (1) Inverter section front panel programmable to 220/230/240VAC.
(2) Can be programmed to operate from 100-270VAC from front panel (generator mode).
(3) Programmable from front panel.


INVO is a 5kVA high frequency pure sinewave inverter/charger designed to be used in long-run UPS applications where the reliability or availability of the utility grid supply is poor.

In normal operation INVO feeds the utility supply directly to the load while at the same time the 3 stage charger keeps the battery fully charged at all times. In the event of utility failure INVO automatically transfers the load to the inverter and monitors the battery charge state.

Using a typical 100AH battery INVO will maintain the load for over 45 minutes and the 30A charger will replenish the battery in less than 4 hours.

INVO is ideal for use in the small office or retail environment where a small number of PCs and EPOS terminals or even air conditioning units need to be kept operational during power outages.

Features and Options

Wide Range AC Input
Up to 5kVA or 4200W Output Power
10kVA Peak Load
Fast 10mS Transfer Time
3 Stage (CC/CV/Float) 30A Charger
Charger Power Factor >0.95

Safety Standards

CSA22.2, No. 60950-1


Two Years

Input Specifications

AC Nominal Voltage: 230VAC
Voltage Range: Normal range - 180-270VAC
Generator Mode (Wide Range) - 100-270VAC
Current: 30A max. @ 230VAC
Frequency: 47-63Hz
Nominal Voltage: 48VDC
Current: 60A max.
UV Alarm: 42VDC ±1.2VDC
UV Shut-Down: 40VDC ±1.2VDC

Output Specifications

Continuous Power: 5000VA/4200W
Maximum Peak Power: 10,000VA
Motor Load: 2.5HP
Voltage (Inverter): 220/230/240VAC
Voltage Regulation (Inverter): ±10%
Frequency: 50Hz or 60Hz
Frequency Regulation (Inverter): ±0.1Hz
Overload Capacity: 110-150% - 10s
150-200% - 5s
Output Waveform: Pure Sinewave
Transfer Time: AC to DC - 10ms Typical
DC to AC - 20ms Typical
Efficiency: AC to DC (Bypass) - >95%
DC to AC (Inverter) - >90%
Protection: Overload, Over Temperature

Physical Specifications

Case Material: Steel
Dimensions, Inches (mm): 4.3 H x 16.0 W x 13.8 D (110 x 407 x 350)
Weight: 19.8 lbs. (9kg.)

Environmental Specifications

Operating Temp. Range: 0ºC to +45ºC
Storage Temp. Range: -20ºC to +70ºC
Humidity: 0% to 95%, Non-Condensing
Cooling: Integral Fans